Rubber Protection Corner 10 mm PARK-DH-130

Length: 800mm, Wing: 100mm, Weight: 2.0 kg

Corners for the protection of structural elements are the optimal solution for the protection of buildings and vehicles in both private and public spaces. They are ideal for garages, industrial areas, areas for loading and unloading goods and in general where corner protectors are required.

They are made of recycled plastic or foam material with a long life and have a strong color and reflectivity to be clearly visible from passing vehicles, also serving as a marking. For this reason, they show impact resistance without tearing due to the elasticity of their material. For the same reason, they do not easily scratch or injure the vehicles that come into contact with them.

They are available in various types depending on their thickness, with a rounded or non-rounded edge and depending on the material of their construction. The rubber protection corners are suitable for places with high traffic and heavy loads. Foam corners are recommended for areas with low traffic and light impact. They have pre-drilled slots for the fixing plugs. The foam corners can also be installed with glue. They can be installed permanently or temporarily.

The structural element protection corners are placed on their edges to protect them from passing vehicles, while at the same time protecting them from minor knocks and scratches. They are 80cm long and can be placed from the ground up to a height of 80cm or leave a gap at the bottom and cover a height of 80cm where the biggest accidents occur. They can also be placed in a row if there is a need to cover a longer distance and practically on any surface . In central columns usually 4 pieces are placed, one at each edge.

They show good behavior in conditions of humidity, large temperature changes and UV radiation and require zero maintenance. No specialized personnel or materials are required for their installation.