Autotech R-2010D control panel (with box) for 230 VAC roller shutter motors with built-in limit switches or sliding garage door motors with NC type limit switches. Accepts safety photocells and single command buttons. It supports automatic shutdown.

• Single-phase motor (230 VAC)
• Operating frequency: 433.92 MHz
• Compatible remote control encoding: 12-bit fixed code, 24-bit Autotech, 64-bit Keeloq
• Country of origin: Greece
• Board dimensions: 100?88 mm
• Box dimensions: 150x98x40 mm (without lip which can be easily removed: 134x98x40 mm)

Key features of Autotech R-2010D panel

• Automatically recognizes roll terminals. The panel works with motors that have limit switches and cut off power to the mechanism when they reach the end of their travel. When the terminal switch cuts the current, the panel automatically senses this and the panel also cuts the supply and reverses the next command. That is, if the motor was closing or the next command will be opening and vice versa.
• It automatically recognizes the terminals of the sliding motor. The motor limit switches are connected to the panel, so when the motor closes it commands to open and vice versa. The panel supports the connection of NC (Normally Closed) contact type limit switches, without voltage (“cold contact”), such as those found in almost all sliding motors with mechanical or magnetic limit switches.
• It supports automatic shutdown after a user-defined time.
• It has a 24 V AC output to power the accessories. (eg safety photocells, etc.)
• It has an input for the safety photocells.
• It has an input for a command button.
• The process for programming the remote controls is extremely simple. It has an AUTO LEARN button from which the procedure for programming the remote controls is carried out. The remote controls supported by the panel are in 433.92 MHz frequency and 12-bit fixed code, Autotech 24-bit or KeeLoq rolling code encoding.
• It has LED lights that control all panel inputs both during installation and during operation of the door.
• SMD technology.
• CE declaration of conformity
• Box dimensions with flap 150x98x40 mm
• Box dimensions without lip 134x98x40 mm (lip can be easily removed)
• Board dimensions 100?88 mm

Autotech R-2010D Control Panel Instructions-Forms